PLANET WNAP-C3220 - Manual (Page 31)

User’s Manual of WNAP-C3220
- 31 -
Figure 22 Setup Wizard - Basic Settings of WDS
 Configure the following fields before entering the Next page.
Object Description
WDS Mode Bridge (WDS) mode includes WDS P2P, WDS P2MP, and WDS AP
Repeater
AP MAC Enter the interconnection equipment’s MAC address.
Channel Select the channel according to interconnection equipment’s; the
devices on the two ends must be at the same channel.
Open Scan Click this button and the AP will scan the nearby wireless devices
automatically and display the information in the table.
Select the device which needs to bridge and the AP will add the
device’s MAC address automatically and select the corresponding
channel.