beautypg.com

Figure 9 manually assign ip to pc – PLANET WNAP-C3220 User Manual

Page 19

background image

User’s Manual of WNAP-C3220

- 19 -

Summary:

 Set up the TCP/IP Protocol for your PC.

 Configure the network parameters. The IP address is 192.168.1.xxx ("xxx" is any number

from 2 to 254), Subnet Mask is 255.255.255.0.

1

Select Use the following IP address radio button.

2

If the AP's LAN IP address is 192.168.1.1, enter IP address 192.168.1.x (x is from 2 to 254), and

Subnet mask 255.255.255.0.

Figure 9 Manually assign IP to PC

Now click OK to save your settings.

Now, you can run the Ping command in the command prompt to verify the network connection

between your PC and the AP. The following example is in Windows XP OS. Please follow the steps

below:

See also other documents in the category PLANET Routers: