PLANET ISW-1022MPT - Manual (Page 71)

User’s Manual of ISW-1022M Series and ISW-1033MT
71
5.5.3.1 Aggregator setting
This section provides Port Trunk-Aggregator Setting of each port from the Switch, the screen in Figure 5-20 appears.
Figure 5-20 Port Trunk—Aggregator Setting interface (two ports are added to the left field with LACP
enabled)
The page includes the following fields:
Object Description
System Priority:
A value which is used to identify the active LACP. The Managed Industrial
Switch with the lowest value has the highest priority and is selected as the active
LACP peer of the trunk group.
Group ID:
There are 13 trunk groups to be selected. Assign the "Group ID" to the trunk
group.
LACP:
When enabled, the trunk group is using LACP. A port which joins an LACP trunk
group has to make an agreement with its member ports first. Please notice that a
trunk group, including member ports split between two switches, has to enable
the LACP function of the two switches. When disabled, the trunk group is a static
trunk group. The advantage of having the LACP disabled is that a port joins the
trunk group without any handshaking with its member ports; but member ports
won’t know that they should be aggregated together to form a logic trunk group.