PLANET ISW-1022MPT - Manual (Page 50)

User’s Manual of ISW-1022M Series and ISW-1033MT
50
5.4 System
Use the System menu items to display and configure basic administrative details of the Managed Industrial Switch. Under
System the following topics are provided to configure and view the system information: This section has the following
items:
■ System Information Provides basic system description, including contact information
■ IP Configuration Sets the IP address for management access
■ DHCP Server Configure the Switch as a DHCP server for assigning dynamic IP addresses
to devices on a network.
■ TFTP Upgrade the firmware via TFTP server
Save/view the switch configuration to remote host
Upload the switch configuration from remote host
■ Fault Relay Alarm Provides relay output for port breakdown, power fail
■ SNTP Configuration Simple Network Time Protocol. Configures SNTP client settings, including
broadcast mode or a specified list of servers
■ IP Security Supports 10 IP addresses that have permission to access the switch
management and to prevent unauthorized intruder.
■ User Authentication Allows configuring the system user name and password required to access
the web pages or log in from CLI.
■ Factory Default Reset the configuration of the Managed Industrial Switch
■ System Reboot Restarts the switch