PLANET ISW-1022MPT - Manual (Page 137)

User’s Manual of ISW-1022M Series and ISW-1033MT
6. Command Sets
Commands Set List
User EXEC E
Privileged EXEC P
Global configuration G
VLAN database V
Interface configuration I
6.1 System Commands Set
Commands Level Description Example
show config E Show switch configuration switch>show config
show terminal P Show console information switch#show terminal
write memory P Save user configuration into
permanent memory (flash
rom)
switch#write memory
system name
[System Name]
G Configure system name switch(config)#system name xxx
system location
[System Location]
G Set switch system location
string
switch(config)#system location xxx
system description
[System Description]
G Set switch system description
string
switch(config)#system description xxx
system contact
[System Contact]
G Set switch system contact
window string
switch(config)#system contact xxx
show system-info E Show system information switch>show system-info
ip address
[Ip-address] [Subnet-mask]
[Gateway]
G Configure the IP address of
switch
switch(config)#ip address 192.168.1.1
255.255.255.0 192.168.1.254
ip dhcp G Enable DHCP client function
of switch
switch(config)#ip dhcp
show ip P Show IP information of switch switch#show ip
no ip dhcp G Disable DHCP client function
of switch
switch(config)#no ip dhcp
reload G Halt and perform a cold restart switch(config)#reload
default G Restore to default switch(config)#default
admin username
[Username]
G Changes a login username.
(maximum 10 words)
switch(config)#admin username xxxxxx
admin password G Specifies a password switch(config)#admin password xxxxxx
137