PLANET ISW-1022MPT - Manual (Page 13)

User’s Manual of ISW-1022M Series and ISW-1033MT
13
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
LED
System :
Power (Green)
Power 1 (Green)
Power 2 (Green)
Fault (Red)
8 port 10/100 :
Link/Activity (Green)
Full duplex/Collision (Yellow)
SFP port :
LNK/ACT(Green)
1000T: LNK/ACT(Green), 1000M(Green)
8 PoE power output :
PoE In-Use (Green)
Console Interface One RJ-45-to –RS-232 male connector for switch management
Power Supply
External Power Supply: DC 48V
Redundant power DC 48V
Removable terminal block for master and slave power
Power Consumption 128 Watts (Full load)
Operating Temperature -40 Degree C~75 Degree C
Operating Humidity 5% to 95% (Non-condensing)
Storage Temperature -40 Degree C ~ 85 Degree C
Case Dimension IP-30, 2.83” x 4.13” x 5.98” / 72mm x 105mm x 152mm
Power over Ethernet
PoE Standard IEEE 802.3af PSE (Power Sourcing Equipment)
Units can be Powered 8
PoE Power Output 48V DC, Max. 15.4 watts, 350mA
Power Pin Assignment 1/2(+), 3/6(-)
Management Functions
Management Interface Console, Telnet, Web Browser, SNMP v1, v2c and v3
Port Configuration
Port disable/enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable. Bandwidth control on each port.
Port Status
Display each port’s speed duplex mode, link status, Flow control status. Auto
negotiation status
VLAN
Port-Based VLAN, up to 9 VLAN groups
IEEE 802.1q Tagged Based VLAN , 4K VLAN ID, up to 256 VLAN groups