PLANET ISW-1022MPT - Manual (Page 152)

User’s Manual of ISW-1022M Series and ISW-1033MT
log switch(config-if)#no event systemlog
no event smpt I Disable port event for SMTP switch(config)#interface fastethernet 3
switch(config-if)#no event smtp
show systemlog P Show system log client &
server information
switch#show systemlog
6.14 SNTP Commands Set
Commands Level Description Example
sntp enable G Enable SNTP function switch(config)#sntp enable
sntp daylight G Enable daylight saving time, if
SNTP function is inactive, this
command can’t be applied.
switch(config)#sntp daylight
sntp daylight-period
[Start time] [End time]
G Set period of daylight saving
time, if SNTP function is
inactive, this command can’t
be applied.
Parameter format:
[yyyymmdd-hh:mm]
switch(config)# sntp daylight-period
20060101-01:01 20060202-01:01
sntp daylight-offset
[Minute]
G Set offset of daylight saving
time, if SNTP function is
inactive, this command can’t
be applied.
switch(config)#sntp daylight-offset 3
sntp ip
[IP]
G Set SNTP server IP, if SNTP
function is inactive, this
command can’t be applied.
switch(config)#sntp ip 192.169.1.1
sntp timezone
[Timezone]
G Set timezone index, use “show
sntp timzezone” command to
get more information of index
number
switch(config)#sntp timezone 22
show sntp P Show SNTP information switch#show sntp
show sntp timezone P Show index number of time
zone list
switch#show sntp timezone
no sntp G Disable SNTP function switch(config)#no sntp
no sntp daylight G Disable daylight saving time switch(config)#no sntp daylight
152