PLANET WGSW-48000 - Manual (Page 65)

User’s Manual of WGSW-48000
65
4.4.6 GVRP
When Switch GVRP is enabled, you can modify the GVRP settings of multiple ports.
But if it's disabled, GVRP will be disabled on all ports.
Click the Modify hyperlink to modify the GVRP settings of multiple ports when Switch GVRP is enabled.
On the port GVRP modification page, you can enable/disable GVRP on the port you specified.
Figure 4-4-4 GVRP
The page contains the following fields:
• Enable GVRP Enables and disables GVRP on the device
• Port
Displays the interface on which GVRP is enabled. Possible field values are:
Port - indicates the port number on which GVRP is enabled.
LAG - indicates the LAG number on which GVRP is enabled.
• GVRP Mode When the checkbox is checked, GVRP is enabled on the interface
• Join Period The interval between transmitting requests/queries to participate in a VLAN group.
Range: 20-1000 centiseconds.
Default: 20 centiseconds
• Leave Period The interval a port waits before leaving a VLAN group. This time should be set to
more than twice the join time. This ensures that after a Leave or LeaveAll message