PLANET WGSW-48000 - Manual (Page 244)

User’s Manual of WGSW-48000
244
access-list name {enable|disable}
Description:
This command enables/disables the ACL entry.
Syntax:
access-list name <WORD> {enable|disable}
Mode
Global Config
access-list name set
access-list name set priority
Description:
This command specifies ACL entry priority.
Syntax:
access-list name <WORD> set priority <0-65535>
Parameters:
<0-65535>
Mode
Global Config
access-list name set IP-mode
access-list name set IP-mode SRC IP.
Description:
This command specifies a source IP address.
Syntax:
access-list name <WORD> set IP-mode SRC IP <mask-addr>
Parameters:
<mask-addr>
Mode
Global Config
access-list name set IP-mode DST IP
Description:
This command specifies a destination IP address.
Syntax:
access-list name <WORD> set IP-mode DSP IP <IP-addr> <mask-addr>