PLANET WGSW-48000 - Manual (Page 263)

User’s Manual of WGSW-48000
263
Mode
Interface Config
6.4.2 LLDP Command
An lldp agent can transmit information about the capabilities and current status of the system associated with its MSAP identifier.
The lldp agent can also receive information about the capabilities and current status of the system associated with a remote
MSAP identifier. However, lldp agents are not provided any means of soliciting information from other lldp agents via this
protocol.
lldp state
Description:
Only transfer the lldp status
Syntax:
lldp state {tx | rx | tx_rx | disable}
Parameters:
{tx | rx | tx_rx | disable}
Mode
Interface Config
lldp notifications
Description:
Enable/disable notification form the agent
Syntax:
lldp notification {enable|disable}
Parameters:
{enable|disable}
Mode
Interface Config
lldp tlvs-tx
Description:
Syntax:
lldp tlvs-tx {enable | disable} option basic {port-desc | sys-name | sys-desc | sys-capa }
Parameters:
{enable | disable}
{port-desc | sys-name | sys-desc | sys-capa }
Mode