PLANET WGSW-48000 - Manual (Page 253)

User’s Manual of WGSW-48000
253
Parameters:
{enable|disable}
Mode
Global Config
dhcpsnooping ports
Description:
This command is used to set ports to trust or untrust.
dhcpsnooping ports trust
Description:
This command is used to set ports to trust
Syntax:
dhcpsnooping ports trust
Parameters:
Mode
Global Config
dhcpsnooping ports untrust
Description:
This command is used to set ports to untrust
Syntax:
dhcpsnooping ports untrust
Parameters:
Mode
Global Config
dhcpsnooping vlan
Description:
This command is used to configure dhcp vlan.
dhcpsnooping vlan add
Description:
This command is used to enable dhcp snooping in a specified vlan.
Syntax:
dhcpsnooping vlan add from to