Qos port-based status, 4 rate-limit command, Rate-limit egress enable token bsize – PLANET WGSW-48000 User Manual

Page 267: Rate-limit egress disable, Rate-limit ingress

User’s Manual of WGSW-48000

267

Qos port-based status

Description:

This command is used to set port-based status.

Syntax:

qos port-based status {enable|disable}

Parameters:

{enable|disable}

Mode

Interface Config

6.4.4 Rate-limit Command

Description:

rate-limit egress

rate-limit egress enable token bsize

Description:

This command limits egress rate, which the unit is Kbps.

Syntax:

rate-limit egress enable token bsize

Parameters:

Mode

Interface Config

rate-limit egress disable

Description:

This command disable egress rate limit.

rate-limit ingress

Description:

This command limits ingress rate, which the unit is Kbps.

Syntax:

rate-limit ingress <rate>

Parameters:

<rate>

Mode

Interface Config