PLANET WGSW-48000 - Manual (Page 235)

User’s Manual of WGSW-48000
235
spanning-tree port priority
Description:
This command configures RSTP port priority.
Syntax:
spanning-tree port priority <0-24>
Parameters:
<0-24>
Mode
Global Config
spanning-tree port edge
Description:
This command configures STP edge.
Syntax:
spanning-tree port edge {enable|disable} ports
Parameters:
{enable|disable} ports
Mode
Global Config
spanning-tree port force-p2plink
Description:
This command configures force point to point link mode on ports.
Syntax:
spanning-tree port force-p2plink {auto|enable|disable} ports
Parameters:
{auto|enable|disable}
Mode
Global Config
spanning-tree port migration-check
Description:
This command Re-checks the appropriate BPDU format to send on ports.
Syntax:
spanning-tree port migration-check {enable|disable} ports
Parameters:
{enable|disable}