PLANET WGSW-48000 - Manual (Page 25)

User’s Manual of WGSW-48000
25
1.5 Product Specification
Product T
WGSW-48000
T
48-Port 10/100/1000Mbps with 4 Shared SFP Managed Gigabit Switch
Hardware Specification
Copper Ports 48 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
SFP / mini-GBIC slots 4 1000Base-SX/LX SFP interfaces, shared with Port-23, Port-24, Port-47 and Port-48
Switch Architecture Store-and-forward
Switch Fabric 96Gbps / non-blocking
Switch throughput 71.4Mpps
Address Table 8K MAC address table with Auto learning function
Share data Buffer
C
4Mbits
Flow Control
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
Jumbo Frame 9K
LED Power, Link/Act per port
Reset Button
< 10 sec: System reboot
> 10 sec: Factory Default
Dimension (W x D x H) 430 x 350x 44.5 mm, 1U height
Weight 3.5 KG
Power Consumption 74 Watt / 252.34 BTU (Maximum)
Power Requirement AC 100~240V, 50/60Hz
Layer F function
T
Management Interface Console, Telnet, SSH, Web Browser, SSL, SNMPv1, v2c and v3
Port configuration
Port disable/enable.
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection.
Flow Control disable / enable.
Port Status
Display each port’s speed duplex mode, link status, Flow control status. Auto negotiation
status, trunk status.
VLAN
IEEE 802.1Q Tag-based VLAN
GVRP for VLAN Management
Up to 255 VLANs groups, out of 4041 VLAN IDs
Private VLAN Edge (PVE) supported
Bandwidth Control
Ingress Rate Limit
Egress Traffic Shaper
Link Aggregation
IEEE 802.3ad LACP / Static Trunk
Supports 14 groups of 8-Port trunk
QoS Traffic classification based on 802.1p priority, DS/TOS field in IP Packet