PLANET WGSW-48000 - Manual (Page 37)

User’s Manual of WGSW-48000
37
Figure 3-1 Console management
Direct Access
Direct access to the administration console is achieved by directly connecting a terminal or a PC equipped with a
terminal-emulation program (such as HyperTerminal) to the Managed Switch console (serial) port.
When using this management method, a straight DB9 RS-232 cable is required to connect the switch to the PC. After
making this connection, configure the terminal-emulation program to use the following parameters:
The default parameters are:
„ 38400 bps
„ 8 data bits
„ No parity
„ 1 stop bit
Figure 3-2 Terminal parameter settings