20 loop_detect command, Loop_detect enable, Loop_detect disable – PLANET WGSW-48000 User Manual

Page 256: Loop_detect recovertime, Loop detect trytorecover, 19 loop_detect command

User’s Manual of WGSW-48000

256

6.3.19 Loop_detect Command

Loop_detect enable

Description:

This command is used to enable port self-loop detection.

Syntax:

loop_detect enable

Mode

Global Config

loop_detect disable

Description:

This command is used to disable port self-loop detection.

Syntax:

loop_detect disable

Mode

Global Config

loop_detect recovertime

Description:

This command is used to set the recover time.

Syntax:

loop_detect recovertime <0…65535>

Parameters:

<0…65535>

Mode

Global Config

loop detect trytorecover

Description:

This command is used to try to recover all the selfloop port immediately

Syntax:

loop_detect trytorecover

Mode

Global Config