PLANET SGS-5220-24P2X - Manual (Page 43)

User’s Manual of SGS-5220 Series
If there are two LAN cards or above in the same administrator PC, choose a different LAN card
by using the “Select Adapter” tool.
3. Press “Refresh” button for the currently connected devices in the discovery list as the screen shows below:
Figure 3-1-7: Planet Smart Discovery Utility Screen
. This utility shows all necessary information from the devices, such as MAC Address, Device Name, firmware version, and
g of
on one single device.
.
tools bar.
w setting value to the Web Smart Switch
nd the Web login screen appears in Figure 3-1-4.
5. Press “Exit” button to shut down the Planet Smart Discovery Utility.
1
Device IP Subnet address. It can also assign new password, IP Subnet address and description for the devices.
2. After setup is completed, press “Update Device”, “Update Multi” or “Update All” button to take effect. The meanin
the 3 buttons above are shown as below:

Update Device : use current setting

Update Multi: use current setting on choose multi-devices

Update All: use current setting on whole devices in the list.
The same functions mentioned above also can be found in “Option”
3. To click the “Control Packet Force Broadcast” function, it can allow assign ne
under a different IP subnet address.
4. Press “Connect to Device” button a
43