12 qcl status – PLANET SGS-5220-24P2X User Manual
Page 193
User’s Manual of SGS-5220 Series
3. LLC
4. SNAP
5. IPv4
6. IPv6
Note
: all frame types are explained below.
Allow all types of frames.
Any
Ethernet Type
Valid ethernet type can have value within 0x600-0xFFFF or 'Any'
but excluding 0x800(IPv4) and 0x86DD(IPv6), default value is 'Any'.
EtherType
■
SSAP Address
Valid SSAP(Source Service Access Point) can vary from
0x00 to 0xFF or 'Any', the default value is 'Any'
■
DSAP Address
Valid DSAP(Destination Service Access Point) can vary
from 0x00 to 0xFF or 'Any', the default value is 'Any'
■
Control Address
Valid Control Address can vary from 0x00 to 0xFF or
'Any', the default value is 'Any'
LLC
PID
Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any',
default value is 'Any'
SNAP
■
Protocol
IP protocol number: (0-255, TCP or UDP) or 'Any'
■
Source IP
Specific Source IP address in value/mask format or 'Any'. IP and
Mask are in the format x.y.z.w where x, y, z, and w are decimal numbers
between 0 and 255. When Mask is converted to a 32-bit binary string and
read from left to right, all bits following the first zero must also be zero
DSCP
Diffserv Code Point value(DSCP): It can be specific value, range of
value or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7,
EF or AF11-AF43
■
IP Fragment
IPv4 frame fragmented option: yes|no|any
■
Sport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP
■
Dport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP
IPv4
Protocol
IP protocol number: (0-255, TCP or UDP) or 'Any'
Source IP
IPv6 source address: (a.b.c.d) or 'Any', 32 LS bits
DSCP
Diffserv Code Point value(DSCP): It can be specific value, range of value
or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or
AF11-AF43
Sport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable
for IP protocol UDP/TCP
Dport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP
IPv6
Action Parameters
Class
QoS class: (0-7) or 'Default'.
193