4 dynamic ip source guard table – PLANET SGS-5220-24P2X User Manual
Page 286

User’s Manual of SGS-5220 Series
status for this particular port.
The VLAN ID of the entry.
VLAN ID
The MAC address of the entry.
MAC Address
The IP address of the entry.
IP Address
Buttons
Auto-refresh
: Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.
: Refreshes the displayed table starting from the "Start from MAC address" and "VLAN" input fields.
: Flushes all dynamic entries.
:
Updates the table starting from the first entry in the MAC Table, i.e. the entry with the lowest VLAN ID and MAC
address.
: Updates the table, starting with the entry after the last entry currently displayed.
4.13.4 Dynamic IP Source Guard Table
Entries in the Dynamic IP Source Guard Table are shown on this Page. The Dynamic IP Source Guard Table is sorted first by
port, then by VLAN ID, then by IP address, and then by IP mask. The Dynamic IP Source Guard Table screen in
Figure 4-13-4
appears.
Figure 4-13-4:
Dynamic IP Source Guard Table Screenshot
Navigating the ARP Inspection Table
Each Page shows up to 99 entries from the Dynamic IP Source Guard table, default being 20, selected through the "entries per
Page
" input field. When first visited, the web Page will show the first 20 entries from the beginning of the Dynamic IP Source
Guard Table.
The "Start from port address", "VLAN", "IP address" and "IP mask" input fields allow the user to select the starting point in the
Dynamic IP Source Guard Table. Clicking the “Refresh” button will update the displayed table starting from that or the closest
286