PLANET SGS-5220-24P2X - Manual (Page 30)

User’s Manual of SGS-5220 Series
Step 6: Proceed with Steps 4 and 5 of session 2.2.1 Desktop Installation to connect the network cabling and supply power to the
Managed Switch.
2.2.3 Installing the SFP/SFP+ Transceiver
The sections describe how to insert an SFP/SFP+ transceiver into an SFP/SFP+ slot. The SFP/SFP+ transceivers are
hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP/SFP+ port without having to power
down the Managed Switch, as the Figure 2-2-4 shows..
Figure 2-2-4: Plug-in the SFP/SFP+ Transceiver
 Approved PLANET SFP/SFP+ Transceivers
PLANET Managed Switch supports both single mode and multi-mode SFP/SFP+ transceiver. The following list of approved
PLANET SFP/SFP+ transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100Base-X SFP)
Model Speed (Mbps)
Connector
Interface
Fiber Mode Distance Wavelength (nm) Operating Temp.
MFB-FX 100 LC Multi Mode 2km 1310nm 0 ~ 60 ℃
MFB-F20 100 LC Single Mode 20km 1310nm 0 ~ 60 ℃
MFB-F40 100 LC Single Mode 40km 1310nm 0 ~ 60 ℃
MFB-F60 100 LC Single Mode 60km 1310nm 0 ~ 60 ℃
MFB-F120 100 LC Single Mode 120km 1550nm 0 ~ 60 ℃
MFB-TFX 100 LC Multi Mode 2km 1310nm -40 ~ 75 ℃
MFB-TF20 100 LC Single Mode 20km 1550nm -40 ~ 75 ℃
Fast Ethernet Transceiver (100Base-BX, Single Fiber Bi-Directional SFP)
Model Speed (Mbps)
Connector
Interface
Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp.
MFB-FA20 100 WDM(LC) Single Mode 20km 1310nm 1550nm 0 ~ 60 ℃
30