PLANET SGS-5220-24P2X - Manual (Page 247)

User’s Manual of SGS-5220 Series
To delete a TACACS+ server entry, check this box. The entry will be deleted
during the next Save.
 Delete
The IP address or hostname of the TACACS+ server.  Hostname
The TCP port to use on the TACACS+ server for authentication.  Port
This optional setting overrides the global timeout value. Leaving it blank will use
the global timeout value.
 Timeout
This optional setting overrides the global key. Leaving it blank will use the global
key.
 Key
Buttons
: Click to ad d a new TACACS+ server. An empty row is added to the table, and the
TACACS+ server can be configured as needed. Up to 5 servers are supported.
: Click to undo the addition of the new server.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.11.8 RADIUS Overview
This Page provides an overview of the status of the RADIUS servers configurable on the Authentication configuration Page. The
RADIUS Authentication/Accounting Server Overview screen in Figure 4-11-9 appears.
Figure 4-11-9: RADIUS Authentication/Accounting Server Overview Page Screenshot
247