PLANET SGS-5220-24P2X - Manual (Page 216)

User’s Manual of SGS-5220 Series
216
Specify the TCP "Push Function" (PSH) value for this ACE.  TCP PSH
■ 0 : TCP frames where the PSH field is set must not be able to match this
entry.
■ 1 : TCP frames where the PSH field is set must be able to match this entry.
■ Any : Any value is allowed ("don't-care").
 TCP ACK Specify the TCP "Acknowledgment field significant" (ACK) value for this ACE.
■ 0 : TCP frames where the ACK field is set must not be able to match this
entry.
■ 1 : TCP frames where the ACK field is set must be able to match this entry.
■ Any : Any value is allowed ("don't-care").
 TCP URG Specify the TCP "Urgent Pointer field significant" (URG) value for this ACE.
■ 0 : TCP frames where the URG field is set must not be able to match this
entry.
■ 1 : TCP frames where the URG field is set must be able to match this entry.
■ Any : Any value is allowed ("don't-care").
 Ethernet Type Parameters
The Ethernet Type parameters can be configured when Frame Type "Ethernet Type" is selected.
Object Description
Specify the Ethernet type filter for this ACE. 
EtherType Filter
■ Any : No EtherType filter is specified (EtherType filter status is
"don't-care").
■ Specific : If you want to filter a specific EtherType filter with this ACE,
you can enter a specific EtherType value. A field for entering a
EtherType value appears.

Ethernet Type Value
When "Specific" is selected for the EtherType filter, you can enter a specific
EtherType value.
The allowed range is 0x600 to 0xFFFF but excluding 0x800(IPv4), 0x806(ARP)
and 0x86DD(IPv6). A frame that hits this ACE matches this EtherType value.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Return to the previous Page.