Avago Technologies MegaRAID SATA 300-4XLP - Manual (Page 8)

viii Preface
Version 1.4 Copyright © 2004–2006 by LSI Logic Corporation. All rights reserved.
Revision History
Safety Instructions
Use the following safety guidelines to help protect your computer system
from potential damage and to ensure your own personal safety.
Note: Use the MegaRAID SATA 300 RAID Controllers with UL
listed ITE products only.
When Using Your Computer System
As you use your computer system, observe the following safety
guidelines:
Caution: Do not operate your computer system with any cover(s)
(such as computer covers, bezels, filler brackets, and front
panel inserts) removed:
•
Be sure the voltage selection switch on the power supply is set to
match the alternating current (AC) power available at your location:
– 115 volts (V)/60 hertz (Hz) in most of North and South America
and some Far Eastern countries such as Japan, South Korea,
and Taiwan
Document
Number
Date/Version Remarks
80-00153-01
Rev. B October 2006
Version 1.4
Removed all references to port multipliers,
which are not supported.
80-00153-01
Rev. A July 2006,
Version 1.3
Corrected jumper information and a
graphic for the SATA 300-8XLP RAID con-
troller. Added the SATA 300-4ELP and
SATA 300-4XLP RAID controllers.
DB15-000311-02 January 2006,
Version 1.2
Added the SATA 300-8ELP RAID controller
to the guide.
DB15-000311-01 October 2005,
Version 1.1
Added the SATA 300-8XLP RAID controller
to the guide.
DB15-000311-00 December 2004,
Version 1.0
Initial release of this document.