Avago Technologies MegaRAID SATA 300-4XLP - Manual (Page 31)

MegaRAID SATA 300 Storage Adapters User’s Guide 3-1
Version 1.4 Copyright © 2004–2006 by LSI Logic Corporation. All rights reserved.
Chapter 3
SATA 300 Storage Adapter
Specifications
This chapter describes the specifications of the MegaRAID SATA 300
PCI-X and SATA 300 PCI Express to Serial ATA storage adapters. This
chapter consists of the following sections:
•
Section 3.1, “MegaRAID SATA 300 Storage Adapter Specifications”
•
Section 3.2, “Storage Adapter Board Specifications”
•
Section 3.3, “Physical and Environmental Specifications”
3.1 MegaRAID SATA 300 Storage Adapter Specifications
The SATA 300 PCI-X storage adapters conform to the PCI-X Local Bus
Specification, Revision 1.0a, and the SATA 300 PCI Express storage
adapters conform to the PCI Express Specification, Revision 1.0a. They
are backward compatible with previous revisions of the PCI specification.
All the SATA 300 storage adapters support the Serial ATA 1.0
Specification and Serial ATA II Extensions to Serial ATA 1.0, Revision
1.0.
Table 3.1 lists the SATA 300 storage adapters and summarizes the board
specifications.
Table 3.1 MegaRAID SATA 300 Storage Adapter Specifications
Storage
Adapter
Ports RAID Levels PCI Bus Mode Board Dimensions
SATA 300-4XLP
(low-profile) 4 0, 1, 5, and 10 64 bits, 133 MHz PCI-X 7.1 x 2.536 inches
(180.34 x 64.41 mm)
SATA 300-4ELP
(low-profile) 4 0, 1, 5, and 10 x4 PCI Express
(2.5 Gbits/s per PCI
Express lane) 7.71 x 2.536 inches
(195.83 x 64.41 mm)