Avago Technologies MegaRAID SATA 300-4XLP - Manual (Page 38)

3-8 SATA 300 Storage Adapter Specifications
Version 1.4 Copyright © 2004–2006 by LSI Logic Corporation. All rights reserved.
3.2.5 SATA 300-8X Board Layout
Figure 3.3 provides the layout of the SATA 300-8X board.
Figure 3.3 SATA 300-8X Board Layout
J8 LED Drive
Fault Connector Interface 16-pin (8x2) jumper.
Provides LED interface individually to eight SATA II ports.
The LED indicates a drive fault on particular ports.
J9 SATA 300-4ELP Ports Ports 0-3.
These ports connect the cables from the adapter to the SATA
physical drives.
J11 Battery Backup Connector
(located on the back side of
the RAID controller) 20-pin connector.
Provides interface to the remote battery pack.
Table 3.3 SATA 300-4ELP Connectors and Jumpers (Cont.)
Jumper Type Description
J2
Port 7
Port 6
J4
Port 5
Port 4
J5
Port 3
Port 2
J12
Port 1
Port 0
J1
P1
U15
J3
J9
J7
J6
J10
J8
J11
J13