Avago Technologies MegaRAID SATA 300-4XLP - Manual (Page 27)

Detailed Installation Instructions 2-3
Version 1.4 Copyright © 2004–2006 by LSI Logic Corporation. All rights reserved.
Align the SATA 300 PCI-X storage adapter to a PCI-X slot.
Press down gently (but firmly) to properly seat the storage
adapter in the slot.
Figure 2.1 shows how to insert the SATA
300 PCI-X storage adapter into a slot.
Caution: If your board has a memory module or BBU module, never
apply pressure to the module when inserting the board.
Figure 2.1 Inserting a MegaRAID SATA 300 Storage Adapter into a
PCI-X Slot
64-Bit Slots
(3.3 V)
Edge of
Mainboard
Bracket Screw
Press Here
Press Here
or Riser