Avago Technologies MegaRAID SATA 300-4XLP - Manual (Page 36)

3-6 SATA 300 Storage Adapter Specifications
Version 1.4 Copyright © 2004–2006 by LSI Logic Corporation. All rights reserved.
3.2.3 SATA 300-4ELP Board Layout
Figure 3.2 provides the layout of the SATA 300-4ELP board.
Figure 3.2 SATA 300-4ELP Board Layout
J8 SATA 300-4XLP Ports Ports 0–3.
These ports connect the cables from the adapter to the SATA
physical drives.
J9 LED SATA Activity
Interface Connector 8-pin (4x2) jumper.
Provides LED interface individually to eight SATA ports. The LED
indicates SATA activity on specific ports.
J10 LED Drive Fault
Interface Connector 8-pin (4x2) jumper.
Provides LED interface individually to eight SATA ports. The LED
indicates a drive fault on specific ports.
Table 3.2 SATA 300-4XLP Connectors and Jumpers (Cont.)
Jumper Type Description
J3
J9
P1
U13
Ports
J8
J1
J4
J5
J6
J7
J2
U14
0–3
J11
Connector Located
on Back of Board