Epson Professional Series II - Manual (Page 6)

16. Excessive brightness for long periods may permanently imprint
an image on the screen.
17. To avoid picture distortion or color disturbance, do not put
devices that generate magnetism (such as telephones, televisions,
speakers, or magnetic screwdrivers) near the monitor.
18. When you finish using the monitor, turn it off by pressing the
power button. (Always wait at least five seconds before you turn
it back on.) When the monitor will not be used for a long period
of time, unplug the power cord.
19. Unplug the monitor from the wall outlet and refer servicing to
authorized service personnel under the following conditions:
A. If the power cord or plug is damaged.
B. If the monitor has come into contact with any liquids, such as
rain or spills.
C. If the monitor does not operate normally when the operating
instructions are followed. Adjust only those controls that are
covered by the operating instructions; improper adjustment
of other controls may result in damage and will often require
extensive work by a qualified technician to restore the
product to normal operation.
D. If the monitor has been dropped or the cabinet or glass
faceplate has been damaged.
E. If the monitor exhibits a distinct change in performance
iv Professional Series II Monitor