Epson Professional Series II - Manual (Page 48)

5. Check if you need to set up your application program(s) to
match your monitor.
6. Contact your dealer or service representative; the monitor
needs repair.
The screen is blank and the LCD does not display a
SYNC O FF
error message.
1. Adjust the brightness and contrast as described on page 21.
2. Contact your dealer or service representative; the monitor
needs repair.
There is an image on the screen but the LCD is dim.
The monitor is operating properly. If you do not touch the
power button or any control panel buttons for about
30 seconds, the monitor automatically turns off the LCD. When
the LCD is off, you can still see a dim image on it.
To turn the LCD back on when it dimly displays the number of
the current video mode or Mode not found, press the - or +
side of the Brightness or Contrast button. To turn the LCD back
on when it dimly displays Mem Select, press
MEM SEL.
The LCD displays Mode not found.
The display parameter settings for the current video mode have
not been stored in the monitor’s memory. You may create a
user-defined video mode, as described on page 28, or continue
working. The monitor operates properly even if you do not
create a user-defined video mode and the LCD continues to
display Mode not found.
4 0 Professional Series II Monitor