Epson Professional Series II - Manual (Page 18)

Connecting Two of More Monitors to One Video
Controller
Using the monitor’s BNC connectors, you can connect two or
more monitors to a single video controller for demonstrations
and other applications. To connect two or more monitors to one
video controller, you need the following:
One video interface cable with a VGA connector on one end
and five color-coded cables with BNC connectors on the
other
Five video interface cables with BNC connectors on
both ends and five T-BNC connectors (called T connectors
here) for each additional monitor.
These cables and connectors are available at computer and
electronics stores. For best results, make sure the video
interface cables for connecting the monitors to each other are
the same length and impedance. Also, avoid using very long
cables because this may affect the quality of the images
displayed on the additional monitor(s).
Note
It is best to connect no more than three monitors to one
video controller. If you connect more than three monitors,
the image may deteriorate slightly on each additional
monitor
you connect.
75 video Interface cable with video interface cable with one
one BNC connector on each end VGA and five BNC connectors
T connector
10
Professional Series II Monitor