Epson Professional Series II - Manual (Page 33)

Modifying a Video Mode
When the monitor is using a factory-set or user-defined video
mode, you can customize the screen image by adjusting the
mode’s display parameter settings. When the LCD displays the
number of the current video mode, follow the steps below to
modify its display parameter settings. (If the LCD is off, press
the Brightness or Contrast button to turn it back on.)
To customize the screen image when the LCD displays
1. Press FUNCT. The LCD displays the name of a display
parameter you can adjust, such as Hor Phase : 4. The
number next to the display parameter name indicates the
current setting.
2. You can adjust the displayed parameter as described in
step 3 or press FUNCT until you see the name of a parameter
you want to adjust. For example, if you want to center the
image vertically, press FUNCT until the LCD displays
Vert Shift.
Professional Series II Monitor 2 5