beautypg.com

Epson Professional Series II User Manual

Page 38

background image

When you are finished adjusting the image, press

MEM SEL.

The LCD displays Mem Select : n (where n is a number

from 15 through 22 and represents the first available
user-defined video mode). If no arrow appears after the

user-defined video mode number, there is currently no

display information for this mode stored in the monitor’s

memory.

Note

If the LCD displays Mem Select :

n is a

number from 15 through 22), the monitor already

contains eight user-defined video modes. The arrow

after the user-defined video mode number indicates that
display information for this mode is stored in the

monitor’s memory.

If you want to store your settings over the previous
display information for this mode, go to step 7. If you

want to store your settings over another user-defined

video mode, select another mode by pressing the + or -
side of the Adjustment button.

Before you go to step 7, make sure you want to store

your settings over the previous settings for the mode

you select. After you store new display information for a
user-defined video mode, you cannot recall the previous
display information for the mode.

(If you do not want to create a user-defined video mode at

this time, press

MEM SEL

again. The LCD redisplays

Mode not found.)

7.

To save your settings for the displayed user-defined video
mode, press

MEM STORE.

The LCD displays the number of

the current user-defined video mode.

3 0

Professional Series II Monitor