TA Triumph-Adler P-3020 MFP User Manual
Page 463
Appendix-17
Some label paper has large margins on the top sheet. When using such paper, do not peel these margins from the
carrier sheet before completing output.
Use label paper that conforms to the following specifications.
Colored Paper
Colored paper must conform to the specifications listed on the page 11 of the Appendix. In addition, the pigments in
the paper must be able to withstand the heat of printing (up to 200°C or 392°F).
Preprinted Paper
Preprinted paper must conform to the specifications listed on the page 9 of the Appendix. The colored ink must be
able to withstand the heat of printing. It must be resistant to silicone oil as well. Do not use paper with a treated surface
such as glossy paper used for calendars.
Recycled Paper
Recycled paper must conform to the specifications listed on the page 11 of the Appendix; however, its whiteness may
be considered separately.
NOTE:
Before purchasing recycled paper in volume, try testing a sample to ensure that the print quality.
Item
Specifications
Top sheet weight
44 to 74 g/m²
Basis weight
(overall paper weight)
104 to 151 g/m²
Top sheet thickness
0.086 to 0.107 mm
Overall paper thickness
0.115 to 0.145 mm
Moisture content
4 to 6 % (composite)
Top sheet
Not allowed
Allowed
Carrier sheet