Color selection, Color selection -13 – TA Triumph-Adler P-3020 MFP User Manual
Page 159

5
5-13
Sending Functions
Color Selection
This feature allows you to select the select the color mode used for scanning when sending images. You can select
from Auto (Color/Gray), Auto (Color/B&W), Full Color, Grayscale or Black & White.
Use the procedure below to select the color mode when sending scanned images.
1
Press the Send key.
2
Place the original.
3
Press the Function Menu key. Function Menu appears.
4
Press the or key to select [Color Selection].
5
Press the OK key. Color Selection appears.
6
Press the or key to select the desired color mode.
7
Press the OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
8
Specify the destination, and press the Start key to start
sending.
NOTE:
Press the Reset key to reset the settings selected in
Function Menu.
Function Menu:
a
b
*********************
2 Original Size
T
3 Original Image
T
[ Exit
]
1 Color Selection T
Color Selection: a
b
*********************
2 Auto(Color/B&W)
3 Full Color
1 *Auto(Color/Gray)