TA Triumph-Adler P-3020 MFP - Manual (Page 341)

8
8-135
Default Setting (System Menu)
Restarting the System
Restart the printer without turning the power switch off. Use
this to deal with any unstable operation by the machine.
(Same as the computer restart.)
Use the procedure below to restart the system.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [Restart].
4 Press the OK key. A confirmation screen appears.
5 Press [Yes] (the Left Select key). The printer is
restarted.
If you press [No] (the Right Select key), the printer does
not restart and the screen returns to the System menu.
Sys. Menu/Count.:a b
*********************
2 Counter
3 System/Network
[ Exit ]
1 Report
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting
Restart.
Are you sure?
[ Yes ] [ No ]