Tcp/ip …8-166, Ipv4 setting …8-166, Ipv6 setting …8-166 – TA Triumph-Adler P-3020 MFP User Manual
Page 372
8-166
Default Setting (System Menu)
TCP/IP
This specified whether TCP/IP is used.
The method for setting is the same as for the standard Network settings. For details, refer to
IPv4 Setting
This selects the settings for TCP/IP (IPv4). The method for setting is the same as for the standard Network settings.
For details, refer to
TCP/IP (IPv4) Setup on page 8-137.
IPv6 Setting
This selects the settings for TCP/IP (IPv6). The method for setting is the same as for the standard Network settings.
For details, refer to
TCP/IP (IPv6) Setup on page 8-146.
Bonjour Settings
Select whether or not to use Bonjour. The default setting is Off.
Use the procedure below to specify the Bonjour setting.
1
In the Sys. Menu/Count. menu, press the or key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2
The System/Network menu appears.
3
Press the or key to select [Optional Network].
4
Press the OK key. The Optional Network screen
appears.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit
]
3 System/Network
Login User Name: L
b
*******************
Login Password:
[ Login
]
System/Network:
a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit
]
1 Network Setting
Optional Network:a b
1 Basic
[ Exit
]