TA Triumph-Adler P-3020 MFP - Manual (Page 322)

8-116
Default Setting (System Menu)
Adjustment/Maintenance
Adjust printing quality and conduct machine maintenance.
• Copy Denst. Adj. …8-116
• Send/Box Density …8-117
• Backgrnd Density …8-117
• Print Density …8-118
• Correct. Bk Line …8-119
• New Developer...8-120
• DP Adjustment...8-121
NOTE: If user login administration is enabled, you can only change the settings by logging in with administrator
privileges.
Copy Denst. Adj.
Adjust copy density. Adjustment can be made in 7 levels.
Use the procedure below to adjust the copy density.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu appears.
3 Press the  or  key to select [Copy Denst. Adj.].
4 Press the OK key. Copy Denst. Adj. appears.
5 Press the  or  key to select the density from
[-3 Lighter] to [+3 Darker].
6 Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
Sys. Menu/Count.:a b
: Document Box
; Edit Destination
*********************
[ Exit ]
< Adjust/Maint.
Adjust/Maint.: a b
*********************
2 Send/Box Density
3 Backgrnd Density
[ Exit ]
1 Copy Denst. Adj.
Copy Denst. Adj.: a b
3 -1
*********************
5 +1
4 * 0 Normal