TA Triumph-Adler DC 2020 - Manual (Page 67)

CHAPTER 8 WHEN A PROBLEM OCCURS
8-8
6-9
9-1
3-6
4-1
7-1
3-1
3-1
8-3
6-9
4-2
Copies come out too dark. Is the copier in the auto exposure mode? To change the overall exposure, perform the
auto exposure adjustment.
Is the copier in the manual exposure mode? Adjust the exposure to the correct degree
using the copy exposure adjustment keys.
To change the overall exposure, perform the
exposure adjustment for the each copy
quality mode.
Copies are dirty. Is the platen or the original cover dirty? Clean the platen and/or the original cover.
Open the front cover and pull and push back
in the cleaning shaft.
Copy image is askew. Are the originals set correctly? When setting originals on the platen, align
their edges with the correct original size
scale for their size.
When setting originals in the optional DF,
adjust the original insertion guides to the
size of the originals correctly.
Misfeed occurs frequently. Is the paper set correctly in the drawer? Set paper properly.
Is paper curled, folded or wrinkled? Replace the paper with new paper.
Is there any misfed paper or loose scraps of
paper remaining inside the copier? Carry out the appropriate procedure to
remove the paper.
Trouble Checks Action Page