TA Triumph-Adler DC 2020 - Manual (Page 29)

CHAPTER 5 FUNCTIONS
Select whether to rotate the back side of the copy 180 de-
gree or not.
Press the enter key.
The message display will be changed to the “DUPLEX
MODE.” screen.
Press the Start key. Scanning of the originals will start. When
setting the original in the DF, copying will be performed.
When setting the original on the platen, go to the next step.
Replace the original and press the Start key. Scanning of the
originals will start. Carry out the same procedures to the
originals of which copying will be performed, and finally,
press the enter key. Copying will start.
8
9
6
7
5-3