TA Triumph-Adler DC 2020 - Manual (Page 65)

CHAPTER 8 WHEN A PROBLEM OCCURS
8-6
5
2
3
4
1
2
3
1
Close the left cover and multi-bypass.
IMPORTANT
• If the optional duplex unit is installed, be sure to close the multi-
bypass closing the duplex unit.
3 3 3 3 3 Misfeed in DF
If the message "MISFEED IN FEEDER. REMOVE ORIGINAL(S)."
appears with the misfeed location indicator shown in the illustration, a
misfeed has occurred in the DF. Remove the misfed original using the
procedure given below.
Remove all the originals from the original table.
Open the DF original cover.
Remove the misfed original.
Close the DF original cover.
Set the misfed original together with those removed back
onto the original table and resume the copying operation.
4 4 4 4 4 Misfeed in duplex unit
If the message "PAPER MISFEED. OPEN DRAWER OF DUPLEX
UNIT." appears with the misfeed location indicator shown in the
illustration, a misfeed has occurred in the duplex unit. Remove the
misfed paper using the procedure given below.
Hold the duplex unit open/close lever 1 and open the
duplex unit.
Hold the switchback guide handle 2 and open the
switchback guide, and then remove the misfed paper.
Close the switchback guide first and then close the duplex
unit.
5 5 5 5 5 Misfeed in finisher
If the message "REMOVE PAPER. FINISHER" appears with the
misfeed location indicator shown in the illustration, a misfeed has
occurred in the finisher.