TA Triumph-Adler CLP 4416 User Manual
Page 54
3-14
Setting your machine
SNTP server configuration
The terminal can automatically update its date and time when connecting to an SNTP server.
Server address
2551 OK - SETUP / NETWORKS / SNTP SERVER / ADDRESS
+
Enter the name of the SNTP server, then validate with OK.
This name can be in the form of an IP address, a DNS address or a NetBIOS name.
Server port
2552 OK - SETUP / NETWORKS / SNTP SERVER /PORT
+
Enter the server port number, then validate with OK.
The port by default is port 123.
Activating the server access
2553 OK - SETUP / NETWORKS / SNTP SERVER / ACTIVATION
+
To activate the SNTP server, select WITH in the drop-down menu then validate with OK.
Time zone
2554 OK - SETUP / NETWORKS / SNTP SERVER / TIME ZONE
+
Select the time zone where the terminal is located from the drop-down list then validate with OK.
If you have activated the automatic summer time management (menu 212), the TIME ZONE setting is
initialised automatically.
Summer time
2555 OK - SETUP / NETWORKS / SNTP SERVER / SUMMER TIME
+
Select the appropriate time setting in the drop-down list: winter time, summer time +1 or
summer time +2, then validate with OK.
Note:
This menu is not displayed if the menu 212 is activated.
PC de-registering
This menu lets you delete one or more PCs connected to the terminal via the LAN.
256 OK - SETUP / NETWORKS / DE-REG. PC
+
Select the PC that you want to delete from the list by means of the
and
arrows, then
validate with OK.