Ieee address (or ethernet address) or mac address, Netbios – TA Triumph-Adler CLP 4416 User Manual
Page 53
Setting your machine
3-13
Op
erat
ion
Setting your
machine
Getting started
Directory
Maintenance
Safet
y
Contents
Instal
lat
ion
IEEE address (or Ethernet address) or MAC address
2535 OK - SETUP / NETWORKS / LOCAL NETWORK / IEEE ADDRESS
The Ethernet card of your terminal already has an unmodifiable, yet consultable, IEEE address.
NetBIOS
The NetBIOS name, which can be used with the network options, are used to identify your
terminal machine from a PC connected to a local network (for instance with the name
"IMP-NETWORK-1").
2536 OK - SETUP / NETWORKS / LOCAL NETWORK / NETBIOS 1
2537 OK - SETUP / NETWORKS / LOCAL NETWORK / NETBIOS 2
+
Enter the selected name (15 characters max) and press OK to confirm.
The WINS1 and WINS2 servers, used with the network options, allow access to terminals on
other sub-networks by means of their NetBIOS name.
These two addresses must be filled in for the Scan To Disk function.
2538 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 1
2539 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 2
+
Enter the IP address of each server, then validate with OK.
Note:
If the terminal is set up in Automatic configuration mode (
2531), these addresses can be filled in auto-
matically by certain DHCP servers.
Case of connection to a domain (for instance with Windows NT,
2000 or XP)
The terminal can identify itself on the local network by using the parameters of a user account,
before it can, among others, archive documents by means of the Scan to Disk function.
Once these parameters have been filled in, they will be used by default, if you do not declare a
user name and password when using the function.
Login user name
2541 OK - SETUP / NETWORKS / DOM LOGIN / USER
+
Enter the user name for login on the local network, then validate with OK.
Login password
2542 OK - SETUP / NETWORKS / DOM LOGIN / PASSWORD
+
Enter the password for login on the local network, then validate with OK.
Domain name
2543 OK - SETUP / NETWORKS / DOM LOGIN / DOM. NAME
+
Enter the domain name of the local network, then validate with OK.