Connections – TA Triumph-Adler CLP 4416 User Manual
Page 22
1-12
Installation
W
ALL
CONNECTIONS
Caution -
Make sure that the mains On/Off switch of the scanner is set to "O" (Off).
T
ELEPHONE
AND
LAN
CONNECTIONS
+
Connect the end of the telephone lead to the telephone wall socket (please see the paragraph
Terminal connections, on page 1-8), for the connections to the scanner.
+
Connect the end of the LAN cable (not supplied) to the local network connector that is allocated
to your terminal (please see the paragraph Terminal connections, on page 1-8), for the
connections to the scanner.
Note:
The printer and the scanner have separate LAN connections. If you dispose of only one connection, you will need
a concentrator or a switch.
P
OWER
LINE
CONNECTION
AND
SWITCH
ON
Caution -
Refer to safety procedures in the chapter Safety.
+
Connect the end of the scanner mains lead of the terminal to the mains wall socket.
+
First set the printer On/Off switch to "I" (On), then set the scanner On/Off switch to "I" (On).
After a few seconds, when the printer has warmed up, the date and time will appear. To adjust the
language and time of your terminal, please see the paragraph Setting your machine, on page 3-1.