TA Triumph-Adler CLP 4416 - Manual (Page 131)

Maintenance
6-15
Op
erat
ion
Se
tti
ng your
mac
h
in
e
Getting started
Directory
Maintenance
Safet
y
Contents
Instal
lat
ion
C
LEANING
Cleaning the scanner’s reading devices
When one or more vertical lines appear on transmitted copies or faxes, follow these steps:
Cleaning the printer
Clean the outside of the printer by means of a soft cloth dampened with neutral household
detergent.
Dust, dirt and paper debris on the outer surfaces and inside the printer can interfere with printer
performance. Clean the printer regularly.
Note: If the message "Clean Printer Press GO" appears after replacing the toner cartridge. Carry out the printer
cleaning procedures (corona, grille, etc.) described in the paragraph General Information, on page 6-2
then press the GO button. The message will disappear and the printer will be ready to print.
+ Open the scanner cover by
pushing it backwards until held
vertically in position
+
Clean the two transparent
scanning windows with a soft,
lint-free cloth, dampened with
alcohol.
+ Close the scanner cover.
+ Make a copy to check that the
symptoms have been cleared.