RIGOL DSG3000 Series - Manual (Page 35)

Chapter 1 Quick Start RIGOL
DSG3000 User’s Guide 1-19
To Replace the Fuse
To replace the fuse, please use the specified fuse and follow the steps below.
1. Turn off the instrument, switch off the power supply and remove the power cord
2. Use a small straight screwdriver to pry out the fuse seat
3. Take out the fuse seat
4. Replace the old fuse with a specified fuse
5. Re-install the fuse seat
Figure 1-7 To Replace the Fuse
WARNING
To avoid electric shock, make sure that the instrument is turned off, the
power supply is disconnected and the fuse used is up to standard
before replacing the fuse.
The location of the
fuse seat
Fuse
Fuse Seat