RIGOL DSG3000 Series - Manual (Page 32)

RIGOL Chapter 1 Quick Start
1-16 DSG3000 User’s Guide
12. Reference Signal Input Connector
It is used to input the external 10 MHz reference
clock signal which is used to synchronize the
generator with other instruments. For more
information about the external clock signal
specification of this connector, please refer to the
data sheet .
13. Reference Signal Output Connector
It is used to output the internal 10 MHz reference
clock signal used to synchronize the generator with
other instruments. For more information about the
output clock signal specification of this connector,
please refer to the data sheet .