RIGOL DSG3000 Series - Manual (Page 134)

RIGOL Chapter 6 Specifications
6-6 DSG3000 User’s Guide
Modulation
[1]
Simultaneous Modulation
AM FM ØM Pulse mod. I/Q mod. (opt.)
AM
― ○ ○ △ ×
FM ○ ― × ○ ○
ШM ○ Ч ― ○ ○
Pulse mod. △ ○ ○ ― ○
I/Q mod.(opt.) ×
○ ○ ○ ―
NOTE: ○:compatible; ×: incompatible; △:compatible with AM Performance reduced
Amplitude Modulation
Operating modes Internal, external, internal + external
Modulation depth [2]
The modulation depth that can be
set from +7dBm to +13dBm
observing the AM specifications
continuously decrease.
0% to 100%
Resolution 0.1%
AM depth uncertainty f
mod
=1kHz <4% of setting+1%
AM distortion f
mod
=1kHz, m<30%, level=0dBm <3% (typ.)
Modulation frequency
response
m<80%, 10Hz to 50kHz <3dB (nom.)
Frequency Modulation
Operating modes Internal, external, internal + external
Maximum deviation N×1MHz (nom.)
Resolution <0.1% of deviation, or 1Hz, whichever is greater (nom.)
Setting uncertainty f
mod
=1kHz, internal mode <2% of setting+20Hz
FM distortion f
mod
=1kHz, deviation= N×50kHz <2% (typ.)
Modulation frequency
response [3]
10Hz to 100kHz <3dB (nom.)
NOTE: [1] The modulation source is sine waveform unless otherwise noted.
[2] Peak power of the envelope is no more than the maximum value of the specification output range.
[3] External operating mode, measured at 100 kHz deviation.