RIGOL DSG3000 Series - Manual (Page 22)

RIGOL Chapter 1 Quick Start
1-6 DSG3000 User’s Guide
4. Function Keys
Set the frequency, frequency offset and phase offset of the
RF output signal. For details, refer to “To Set the
Frequency Parameters”.
Set the amplitude and attenuation of the RF output signal
and provide the flatness calibration function. For details,
refer to “To Set the Amplitude Parameters”.
Set the sweep type, sweep manner and sweep mode. For
details, refer to “Sweep”.
Set the parameters relating to amplitude modulation (AM).
For details, refer to “Amplitude Modulation (AM)”.
Set the parameters relating to frequency modulation (FM)
and phase modulation ( Φ M). For details, refer to
“Frequency Modulation (FM)” and “Phase Modulation
(ΦM)”.
Set the parameters relating to pulse modulation and pulse
generator. For details, refer to “Pulse Modulation”.
Set the parameters relating to I/Q modulation and I/Q
modulation source.
Set the parameters relating to LF output and other extended
functions.
Store and recall the instrument state, flatness calibration
data, sweep list and so on. For details, refer to “Store and
Recall”.
Set the system-related parameters. For details, refer to “To
Set the System Parameters”.