RIGOL DSG3000 Series User Manual
Page 60
RIGOL
10
DSG3000 Quick Guide
4. GPIB
It is used to connect the PC to realize remote
control.
5. OCXO (option)
OCXO is oven controlled crystal oscillator and
can provide frequency reference source with
higher temperature stability.
Note: Forty minutes of warm-up is required
for the OCXO to reach its rated frequency.
About the ordering information of the option,
please refer to the data sheet.
6. Power Input Connector, Fuse and Switch
Power input connector.
The AC power supplies supported by this
signal generator are 100-240 V, 45-440 Hz.
The maximum input power of the instrument
cannot exceed 60 W. When the signal
generator is connected to AC power supply
via this connector, the instrument selects the
correct voltage range automatically and users
do not need to select the voltage range
manually.
Fuse.
The fuse specification of this signal generator
is AC 250 V, T2A.
If the fuse needs to be replaced, please refer
Power Switch
It is used to turn on or off the signal
generator.