RIGOL DSG3000 Series - Manual (Page 55)

RIGOL
DSG3000 Quick Guide 5
When setting parameters, use this key to clear the number
in the active function area and exit the parameter input
state.
When editing filenames, use this key to clear the
characters in the input bar.
During keyboard test, use this key to exit the current test
state.
When the instrument is in remote mode, use this key to
return to local mode.
When setting parameters, use this key to delete the
number at the left of the cursor.
When editing filenames, use this key to delete the
character at the left of the cursor.
For the storage function, it is used to fold the directory
currently selected.
When setting parameters, use this key to finish the
parameter input and add the default unit for the
parameter.
When editing filenames, use this key to input the character
currently selected by the cursor.
For the storage function, it is used to unfold the directory
currently selected.
6. Direction Keys/Step Key
When setting parameters, Step is used to set the step of
the parameter currently selected.
The left/right direction key is used to enter the parameter
editing state and move the cursor to the specified digit.
The up/down direction key is used to modify the value at
the cursor or modify the parameter value at the current
step.
For the storage function, the left/right direction key is
used to fold or unfold the directory currently selected.
The up/down direction key is used to select the current
directory or file.
When editing filenames, they are used to select the
desired character.